Usually, people don’t think much about the type of roof they have until it needs to repair or replace. However, it is important for every house owner to know and understand the types of roofing that can be used for your property. This is important because the type of roof you have not only affects the aesthetics of your house but also has a huge influence on the overall value of the property Calgary roofing.
VH1 Roofing, an expert roofing company in Tulsa Oklahoma, explains that the type of roof you have can make your home more energy-efficient, weather-resistant, and can even provide extra storage or living space. In this article, let us look at some of the best types of roofing recommended by VH1 Roofing.
Best Types of Roofing
Given below are the best types of roofing recommended by VH1 Roofing Company. These types of roofing are considered best especially for the weather conditions of Oklahoma City and the surrounding area.
TPO (Thermoplastic Polyolefin)
A thermoplastic Polyolefin is a form of single-ply roofing membrane. It is one of the fastest-growing commercial roofing systems in the market and is made up of a single layer of synthetics and reinforcing scrim that can also be used to cover flat roofs.
TPO membranes are usually manufactured in sheets that are typically 10, 12, or 20 feet wide. Once these sheets are manufactured, they are rolled up and taken to the commercial facility. TPO is widely accepted because of its naturally reflective surface that reflects UV rays and takes up about 40% of the commercial roofing market.
Modified Bitumen (MB)
Modified Bitumen (MB) roofing is an asphalt-based roofing membrane. It is a close cousin of the Built-up-Roof (BUR) that is specifically designed for buildings with low-slope or flat roofs. Modified Bitumen roofing systems are designed to withstand the harshest of weather conditions and extreme environmental elements.
Modified Bitumen comes with five layers of protection and is considered one of the most trusted and durable roofing systems in the roofing industry. The five layers of Modified Bitumen include:
Insulation
Modified Base Sheets or Piles
Modified Bitumen Membranes
Adhesive
Surfacing
Standing Seam Metal Roofing
Standing seam metal roofing system is a part of the metal roofing family. In the purest form, this roofing system is a group of panels with male and female legs that are engaged and installed with clips to the roofing substructure. However, as the panel options have grown significantly over the years, it is not uncommon to see panels installed without clips as well.
Regardless of how the panels are installed, the roofing system itself can consistently be maintained that standing seam panels do not necessarily use exposed clips or fasteners during the installation of panels. However, if the project requires, the exposed fasteners may or may not be used for trim applications.